COATING FOR ALUMINIUM :
Zircon Coating
PRODUCT DESCRIPTION
COATING Zircoat 45 is a fine grained and high grade pure zirconium, and water based coating. Zircoat 45 is suitable for wide range of applications in ferrous and non ferrous melting. Its also highly effective as an release agent enabling easy removal of solidified metal and dross from ingot mould, carrying ladles, tundishes, launders and buggies.
TYPICAL APPLICATIONS
Coating Zircoat 45 is formulated to produce a very durable refractory barrier which protects refractory material and metal tools against molten metal and slag attack.
APPLICATION
Surface Preparation : The metal surface should be cleaned free from any form oil and grease, free from previous coating by using a suitable solvent .
Dilution : Mix 1 kg of Zircoat 45 with 0.5-1 littres of water till mixture is homogenous. Use a slow speed mixer to avoid air entrapment and can be applied by brushing, dipping, and spraying.
Pre heat : The moulds should be preheated to minimum 150 deg C to prior application. For brush application mould should be heated to 100 deg C.
PHYSICAL PROPERTIES
Solids : 54.0 – 60.0
Pigment : Zirconium & Other Refractories
Diluent : Water
Density : 1.9 – 2.0 kg/l
APPEARANCE : Of White
PACKING : 10 litre/pail
SHELF LIFE : About one year when stored under dry covered condition
DETAIL INFORMASI PRODUK DAN APLIKASI TEKNIK DAPAT MENGHUBUNGI :
PT. KARYA PRIMA MANDIRI
Ir. M.Churiyanto
Mobile : 081511066698
Email : karyaprima.mandiri@yahoo.co.i
No comments:
Post a Comment