FLUXING AND DEGASSING CATEGORY
Product
|
Color
|
Addition
|
Functions
|
Cover Fluxes NF-10
|
White
|
0.3 – 0.5 %
|
Cover molten metal surface to prevent gas pick up from atmosphere and it doesn’t interface with melt chemistry |
Cover Fluxes NF-11
|
White
|
0.5- 1.0 %
|
Cleansing fluxes for efficient recovery of turning and residues of Al. It produces liquid slag and ensures high yields |
Cover Fluxes NF-181 |
White
|
0.5 - 1.0 %
|
Cover Fluxes NF 181 is a white sodium-free cleansing and degassing fluxes for Aluminium Alloy
It can be refines / modifies silicon particles of
Al-Si Alloy there by improves properties |
Cover Fluxes NF -18
|
White
|
0.5 - 1.0%
|
Useful for recovery of Al From hot drosses in a dross bogie |
Wall Refiner Fluxes NF
20
|
Yellow
|
0.5 - 1.0%
|
For Removal of oxide build-up from
furnace wall
|
Degasser
850 HS
|
Red
|
0.2 – 0.4 %
|
Degassing tablet for aluminium . It produces nitrogen gas and ensures hydrogen pick up in the molten |
Injection
Fluxes 110 Series
|
White
|
0.2 - 0.4 %
|
It’s a sodium and sodium free white free flowing powder fluxes which has been specially formulated for use in the injection machines system |
Product
|
Color
|
Addition
|
Functions
|
I NJECTION
FLUXES NF -112
|
White
|
0.2 - 0.5 %
|
Cleansing fluxes for efficient recovery of turning and residues of Al. It produces liquid slag and ensures high yields |
INJECTION
FLUXES NS -118
|
White
|
0.2 – 0.5 %
|
It’s a sodium free white free flowing powder fluxes which has been specially formulated for use in the injection machines system |
COVER FLUXES NF-10
PRODUCT DESCRIPTION
COVER FLUKES NF – 10 is a white covering and drossing off fluxes for Aluminium Alloy which providing reaction to protection aluminium and minimizing melting losses by reducing oxidation and hydrogen pick up.
APPLICATION
The amount of flukes recommended is approximately 0.5-1.0 % base on weight metal.
Manual application through spreading over the molten surface in small quantities or using a shovel. After +/- 2 minutes for Crucible and 5-10 minutes for Reverberatory Furnace the reaction is happened. For the covering through spreading over the molten surface after skimming the drosses.
APPEARANCE : Colour = white
PACKING : 25 Kgs / paper bag
SHELF LIFE : About one year when stored under dry covered condition
COVER FLUXES NF-11
PRODUCT DESCRIPTION
COVER FLUKES NF–11 is a white cleansing and exothermic flukes for Aluminium Alloy which providing good reaction to reducing metallic and non metallic inclution, smokeless and at the same time make minimizing melting losses by reducing oxidation and hydrogen pick up.
APPLICATION
The amount of flukes recommended is approximately 1.2-2.5 kgs per square meter of metal surface area in a reverberatory furnace. In crucible furnace, it is used at 0.5-1.0 % based on weight of metal.
Manual application through spreading over the molten or using a shovel. After +/- 2 minutes for Crucible and 5-10 minutes for Reverberatory Furnace stirring the aluminium melt and the reaction is happened. For the covering through spreading over the molten surface after skimming the drosses.
APPEARANCE : Colour = white
PACKING : 25 Kgs / paper bag
SHELF LIFE : About one year when stored under dry covered condition
REFINER FLUXES NF-20
PRODUCT DESCRIPTION
REFINER FLUXES NF–20 is a yellow high exothermic flukes and low temperature reaction flukes that preferably used to remove oxide in the furnace wall
REFINER FLUXES NF–20 is suitable for melting swarf, turning and dirty scrap. It may be used as washdown flux to remove oxide build up on furnace lining and crucible.
APPLICATION
The amount of fluxes recommended is approximately 1.2-2.5 kgs per square meter of lining surface area in a reveberatory furnace.
Manual application through spreading over the Furnace lining surface area in a reverberatory furnace and in the small quantity in the crucible. It can be used with injection machine.
APPEARANCE : Colour = off yellow
PACKING : 25 Kgs / paper bag
SHELF LIFE : About one year when stored under dry covered condition
DEGASSER 850 HS
PRODUCT DESCRIPTION
DEGASSER 850 HS is degassing tablet for aluminium
DEGASSER 850 HS is made for degassing of aluminium alloys except LM5 and LM10
APPLICATION : Manual with bell Plunger
REACTION TEMPERATUR : > 650 deg C
STANDARD APLICATION RATE : 150 – 300 gms/100 kg melt
APPEARANCE : Red coloured tablet
PACKING : 125 – 130 gms tablets wrapped in a plastics and packed in plastic or steel drums
SHELF LIFE : About one year when stored under dry covered condition
DETAIL INFORMASI PRODUK DAN APLIKASI TEKNIK DAPAT MENGHUBUNGI :
PT. KARYA PRIMA MANDIRI
Ir. M.Churiyanto
Mobile : 081511066698
Email : karyaprima.mandiri@yahoo.co.id
No comments:
Post a Comment