Zircon Mould Coating GEM 30 ( Solvent Base )



GEMTECH
Ferrous and Non Ferrous Chemical



TECHNICAL DATA SHEET


MOULD COATING GEM – 30 Series


DESCRIPTION
GEM – 30 is a ligt blue spirit based mould coating containing Zircon Paste
GEM – 30 is suitable to use for carbon steel casting, Alloy steel casting and iron casting. It’s excellent suspention is providing unique refractoriness and resistance to penetration and sand burnt on problem


APPLICATION

By Spraying 1.5 KGS GEM – 2.0 KGS Diluted by 1 kgs Solvent
By Brushing 1,6 KGS GEM - 2.2 KGS Diluted by 1 Kgs Solvent
Depends on thickness of casting and area where specially  required


APPEARANCE : Color = blue

PACKING         : 25 Kgs / pail

SHELF LIFE      : About six month when stored under dry  covered condition



GEMTECH
Ferrous and Non Ferrous Chemical




TECHNICAL DATA SHEET



PATTERN RELEASE AGENT

GEM – 20 Series



DESCRIPTION

GEM – 20 Series is a fast drying aluminium-pigmented liquid parting agent supplied ready for use, by brush or spray application



APPLICATION
GEM – 20 Series is not wetted out by chemical binders and the platelet structure of the deposited solids allows for release through physical separation of these particles. A ligth application of Gem – 20 is sufficient.

GEM – 20 may settle out during storage but the solids are easily re-suspended with a small amount of agitation before use. Steps should be taken to minimise evaporation in the container, due to the nature of the solvent.

GEM – 20 is subject to the usual restrictions approrite to class 3 flammable liquids


PACKING   : 25 Kgs / pail


PRECAUTIONS
Avoid eye and skin contact
Use with adequate ventilation
Avoid inhalation of vapours
Wear safety glasses, gloves and other necessary proctective equipment




For further Information please contact :



PT. KARYA PRIMA MANDIRI
Ir. M.Churiyanto
Mobile : 081511066698 Email : karyaprima.mandiri@yahoo.co.id


No comments:

Post a Comment